AV HATCH LIFTERS
The AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By activating a switch, it is possible to lift the hatch to any desired position from closed to full open; an internal self-locking mechanism will maintain the position preventing any accidental hatch closing. In case of a power failure an emergency device allows for manual opening.

According to the load required, the AV hatch lifters can be mounted individually, or in twin cylinder installation for heavier loads. It is also possible to install more then two AV actuators in multiple applications.

The AV hatch lifters do not require any maintenance, are easy to install, and are made of materials resistant to corrosion.

OPTIONAL COMPONENTS:

RB12 - 40738 Y Relay box 12V
RB24 - 40742 C Relay box 24V
It contains the relays needed for cycle revertion.

WARNING: The AV Series hatch lifters can be opened freely in the event of a power failure, and can therefore open while underway. The AV Series hatch lifters are not intended for use on high performance boats or in applications where the hatch may open unintentionally. For these applications we recommend the AV-L series hatch lifters, which stay locked when the actuator is in the closed position.

ULYSSES SERIES ELECTRICAL LINEAR ACTUATORS

TECHNICAL FEATURES

  • Maximum load for single installations: 650N (65 kg - 144 lbs)
  • Maximum load is recommended not to be exceeded
  • Supplied with all mounting hardware.
  • Aluminum ram.
  • Circuit breaker to stop accidental overloading of the system and electronic
    stop at closed or full open position.
  • IP 65 protection rated
  • Speed: 5 mm/sec no load applied, 4 mm/sec loaded
  • Current absorption: 2A
OPTIONAL COMPONENTS:

RB12 - 40738 Y Relay box 12V
It contains the relays needed for cycle revertion.
BR - 80382 I
Spare fixing bracket